Коды ошибок HP LaserJet Pro m126 MFP
|
Error Code
|
Display
|
Description
|
Remedy
|
|
22
|
22 Scanner Error
|
The product has experienced an internal hardware error.
|
1. Check all of the FFC connections. 2. Verify that the scanner-carriage can move along the track in the scanner assembly, and that the scanner
motor can rotate. 3. If the error persists, replace the FFC cable. 4. If the error persists, replace the scanner motor or the scanner carriage.
5. If the error persists, replace the formatter.
|
|
50.X
|
50.X Fuser Error
|
The product has experienced an internal hardware error.
|
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the
product directly into the wall socket. 3. Turn on the power and wait for the product to initialize. 4. If the error persists, replace the
fuser.
|
|
52
|
52 Scanner Error
|
The product has experienced a scanner error.
|
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a
surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on. If the
error persists, replace the scanner assembly.
|
HP Pro m126 MFP, HP M126, ошибка
22,
50.1,
50.2,
50.3,
50.4,
50.5,
50.6,
50.7,
52,
как сбросить ошибку HP M126
|
