Error codes Epson L110
|
Êîä îøèáêè
|
Îïèñàíèå
|
Ïðè÷èíà
|
|
01H
|
CR PID excess load error
|
• CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Some
part may be detached. (Paper Guide Upper Assy, Cap Assy) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Cable
disconnection • Main Board failure (Motor driver failure)
|
|
02H
|
CR PID excess speed error
|
• CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Main Board failure (Motor driver failure)
|
|
03H
|
CR PID reverse error
|
• CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Some external force is applied to the printer such as stopping the
CR Unit during printer operation, vibration or the like. • Tooth skip of the CR Timing Belt • Paper jam • Main Board failure (Motor driver
failure)
|
|
04H
|
CR PID lock error
|
• CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • CR Motor failure • CR Unit drive mechanism overload (paper jam,
foreign object, insufficient grease, deformation of the Main Frame) • Some part may be detached. (Paper Guide Upper Assy, Cap Assy) • Cable
disconnection • Main Board failure (Motor driver failure)
|
|
08H
|
CR load position reverse error
|
• CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Main Board failure (Motor driver failure)
|
|
09H
|
CR load position excess speed error
|
• CR Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR
Timing Belt • Paper jam • Main Board failure (Motor driver failure)
|
|
0AH
|
CR load position excess load error
|
• CR Motor failure • CR Unit drive mechanism overload (paper jam, foreign object, Change Lever failure) • Cable disconnection • Main Board
failure (Motor driver failure)
|
|
10H
|
Home position detection error (Scanner)
|
• CIS Module failure • Scanner Housing Upper failure (home seek pattern is dirty) • Scanner Housing Lower failure (the rack section is damaged)
• Scanner Motor failure • Insufficient grease • Foreign object • FFC disconnection/failure • Main Board failure
|
|
20H
|
LED lightning error (Scanner)
|
• CIS Module failure • Foreign object • Scanner Housing Upper failure (white standard pattern is dirty) • Main Board failure
|
|
40H
|
Transistor temperature error
|
• Main Board failurere error
|
|
41H
|
X-Hot detect error (pre printing)
|
• Printhead failure • Main Board failure
|
|
42H
|
X-Hot detect error (after flushing)
|
• Printhead failure • Main Board failure
|
|
43H
|
Head temperature error
|
• Printhead failure • Main Board failure
|
|
50H
|
Home position error
|
• Foreign object • Deformation of the Main Frame • Change Lever failure • Paper jam
|
|
56H
|
Contact error at ink replacement timing (Power-off)
|
• Foreign object • Ink Cartridges are not installed correctly • Paper jam
|
|
5BH
|
Insoluble paper jam error
|
• Foreign object • Deformation of the Main Frame • Change Lever failure • Paper jam
|
|
D1H
|
CR (PID) driving time error
|
• Main Board failure (Firmware failure)
|
|
D2H
|
CR (load position) driving time error
|
• Change Lever failure • CR Motor failure • Main Board failure (Motor driver failure)
|
|
D3H
|
PF (PID) driving time error
|
• Main Board failure (Firmware failure)
|
|
D4H
|
PF (BS) driving time error
|
• Change Lever failure • CR Motor failure • Main Board failure (Motor driver failure)
|
|
F1H
|
PF PID excess load error
|
• PF Motor failure • PF drive mechanism overload (paper jam, foreign object, insufficient grease, deformation of the Main Frame) • Tooth skip
of the PF Timing Belt • Improper tension of the PF Timing Belt • Cable disconnection • Main Board failure (Motor driver failure)
|
|
F2H
|
PF PID excess speed error
|
• PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF
Timing Belt • Main Board failure (Motor driver failure)
|
|
F3H
|
PF PID reverse error
|
• PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF
Timing Belt • Paper jam • Paper is pulled out from the ASF side when paper is fed • Main Board failure (Motor driver failure)
|
|
F4H
|
PF PID lock error
|
• PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • PF Motor failure • PF drive mechanism overload (paper jam, foreign
object, insufficient grease, deformation of the Main Frame) • Cable disconnection • Main Board failure (Motor driver failure)
|
|
F8H
|
PF load position reverse error
|
• PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF
Timing Belt
|
|
F9H
|
PF load position excess speed error
|
• PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF
Timing Belt • Main Board failure (Motor driver failure)
|
|
FAH
|
PF load position excess load error
|
• PF Motor failure • PF drive mechanism overload (paper jam, foreign object) • Tooth skip of the PF Timing Belt • Improper tension of the PF
Timing Belt • Cable disconnection
|
|
FCH
|
PF load position error
|
• PF Encoder failure (contaminated/detached scale, Encoder Sensor failure) • PF Motor failure • PF drive mechanism overload (paper jam, foreign
object) • Cable disconnection
|
