Brother DCP7010 Trouble Error Codes
|
Код ошибки
|
Описание
|
Причина
|
|
56
|
The back cover is opened.
|
|
|
5B
|
New toner detection lever Error (Toner switch stays on.)
|
New toner detection lever broken. New toner detection switch defective
|
|
6A
|
Heater warming-up timeout error. (Heater does not reach 60 within 11 second.)
|
Thermistor defective Halogen heater defective
|
|
6B
|
Heater warming-up timeout error. (Heater does not reach 100 within 15 second.)
|
Thermistor defective Halogen heater defective PS PCB defective
|
|
6C
|
Heater temperature exceeds the maximum high temperature. (270 or more is detected for 1sec.)
|
|
|
6E
|
Heater temperature does not go up enough.
|
Halogen heater defective PS PCB defective
|
|
6F
|
Heater hard limiter operates.
|
Thermistor defective PS PCB defective
|
|
71
|
Scanner motor does not synchronize with the reference clock.
|
Laser unit defective Main PCB defective
|
|
72
|
Cannot detect Beam Detect signal.
|
Laser unit defective Main PCB defective
|
|
73
|
The drum unit is not mounted.
|
|
|
74
|
Toner empty
|
Toner sensor defective Toner empty
|
|
75
|
In casing temperature error.
|
In casing temperature sensor defective
|
|
76
|
Heater overheat
|
Thermistor defective in Fixing unit Halogen heater defective
|
|
77
|
The power supply is turned off when the error 76 or 78 occurs.
|
|
|
78
|
Temperature of the heater does not rise
|
Poor connection in the harness of the halogen lamp Halogen lamp defective Thermistor defective PS PCB unit defective Main PCB defective
|
